| Electric
tricycle vehicle, variable, multi-geometry, for children.
|
||
| Designed
by Mr. Georgios Karytinos |
||
 |
||
| Phone: |
+30
6974789403 and +86 13333092057 (english) |
|
| Phone: |
+86
15131349558 (Chinese) |
|
| Email: |
||
| Skype: |
entimore |
|
| Wechat: |
entimore |
|
| Address: |
Lianglima
Pingxiang, Xingtai city, Hebei. China 054500 |
|
| |
| A
mini vehicle with Formula 1 racing car suspensions, but which can move
with the same efficiency and safety off-road.
|
 |
 |
 |
| It
can be both a tilting tricycle and a anti roll car. The choice between
these two different suspension systems is made by simply moving a lever
from the driver. Many installations options. |
 |
| The
vehicle is designed with anthropometric data. Can be used by people with
a height of 95 cm to 130 cm with the same level of ergonomic comfort.
To make this possible, there are mechanisms by which the driver can adjust: - Four parameters of the driver's seat. - Two parameters of the steering wheel. - The position of the accelerator and brake pedals. Each setting has a maximum and a minimum. All settings can be made directly and easily by the driver. |
 |
 |
|
No lubrication required. Self-lubricating PTFE is used on all axles. The vehicle can accept a load of 120 Kg. The height of the vehicle from the ground can be adjusted by the driver. The stiffness of the suspensions can be adjusted in the same way. |
 |
| The
electric motor is integrated in the rear wheel. Each wheel has disc brakes. |
 |
| Vehicle
parameters: |
|
| Width
(from the centers of the two front wheels): |
800
mm |
| Width: |
946
mm |
| Length
(from the center of the front axle to the center of the rear wheel): |
1.200
mm |
| Length |
1.658
mm |
| Height
from the ground: |
100
mm |
| Chassis
height from the ground: |
100
mm |
| Wheel
diameter: |
304
mm |
| Vehicle
weight (including batteries and electric motor): |
29,750
Kg |
| Required
power: |
150
watt |
| Maximum
speed (maximum speed can be adjusted by the parents): |
40
Km/h |
| Construction
materials: |
Steel |
 |
| Suspension
geometry: |
|
| Angle
camber: |
-10 |
| Angle
toe: |
+20 |
| SCRUB
RADIUS KPI (King pin inclination) or SAI (Steering axis inclination) |
160 |
| Angle
caster: |
+100 |
| Angle
Accerman |
Yes |
| Vertical
displacement of front wheels: |
-70
mm ~ +70 mm |
| Vertical
rear wheel displacement: |
-70
mm ~ +70 mm |
| Inner
wheel radial when turning: |
2.500
mm |
| Minimum
turning radius: |
2.610
mm |
 |
| The
steering axle is constructed in such a way that it tends to move forward,
thus ensuring maximum passive safety for the driver |
 |
|
The
transmission from the steering wheel to the wheels is done with gears
in a ratio of 1/2 |
 |